Whirlpool oven F codes

On the range pages Whirlpool publishes, an F code is not one fault. The owner step on nearly every page is the same: turn the breaker off for 1 minute, turn it back on, and watch for 1 minute. What changes is the part the page names. F1 E1 names the oven control. F2 E1 first asks whether the cooktop grates sit level. F3 E1 names the oven temperature sensor. If the code returns, Whirlpool says to schedule service.
The reset, written once
Whirlpool's wording on these pages is: power the unit down by turning off the circuit breaker for one minute, power it back up, monitor the oven for one minute so the code does not display again, and verify that the oven operates. That is a control reset, not a repair. Do not open the control, the keypad, a temperature sensor, a door latch, a fan, a bake or broil element, or any wiring. If the range burns gas, shut the gas supply off before any inspection past that reset. If you smell gas, leave and call the gas utility. The safety notes cover the same stop point, including the anti-tip bracket before you pull a range out.
The letter does not tell you the part
F1 is a family, not a meaning. F1 E1, F1 E0, F1 E2, F1 E5, F1-7, F1-9, F1-E, F3, and F6 all say there may be a problem with the oven control or the associated wiring. F1 E7 and F1 E9 name the appliance control board instead. F03 and F04 say electronic oven control. F06 says electronic control. F0 E0 says a component of the oven control system. Treat those as different sentences, because Whirlpool wrote them that way.
The sensor sentence is a different group, and it includes codes that do not start with F3. F01, F02, F1, F1-1, F1-2, F1-3, F1-H, F1-L, F2, F3-1, F3 E0, and F3 E1 all name the oven temperature sensor, the control, or the wiring. F3 E2 adds the warming drawer sensor on a range that has one. F3 E3 names the sensor or the wiring and does not mention the control. A reader who only remembers "F3 means the sensor" will misread F3, which is the control sentence, and will miss F1 and F2, which are the sensor sentence.
GE's oven page does not match this map. GE's F0, F1, F6, and F7 share one meaning, a keypanel problem, and GE says the keypanel often needs to be replaced. GE's F3 and F4 name the oven sensor. GE's F2 means the oven temperature exceeded a preset threshold. Samsung does not use this F list at all. Samsung's C-24 is a temperature that rises faster than normal, and Samsung says that is generally a blocked vent. Use the brand printed on the appliance. The oven hub puts those three side by side. LG oven codes are a separate list, cited to LG's range error page.
Two checks that are not only the breaker
F2 E1 is the grate page. When the range is cool, rock each grate corner to corner and side to side. If it wobbles, it may be installed backwards, so switch the grates, then cycle power. The same page still names the user interface or keypad, the control, or the wiring. F2 E0 and F2 E2 through F2 E6 name that keypad sentence and skip the grates. Do not rock a hot grate.
F3 E4 and F8 are the meat probe. Both pages say to verify the probe is securely inserted in the receptacle, and both say the location may vary. Then do the breaker reset. F8 is not the cooling fan. The fan codes are F7 E5, F7 E6, F8 E0, and F8 E2. F8 E0 says the cooling fan speed is too low and mentions an airflow restriction. F8 E2 says the speed is too high and does not mention a restriction. Neither page tells you to open the fan.
Door, heat, and Wi-Fi
Latch wording is not identical, so the table keeps it. F5 names the oven door latch assembly and the door latch switches. F5 E1, F5 E2, and F5 E3 say main oven door latch assembly and the door switch. F7 E1 names only the door switch. F7 E0 names the latch assembly and does not name the switch. F9-1, F9-2, F9-3, F1-A, and F1-C name the oven door latch and the door lock switch. None of those pages publish the button sequence on the GE Loc Door page. Do not force a locked door.
F5 E5 says the oven has not reached self-clean temperature after 30 minutes, and that there may be a problem with the door hinges or the door gasket. The only owner step is still the breaker reset. Do not take the door off. FEE6 names the main cavity bake element. FEE7 names the broil element. FEE8 publishes the reset and names no part, so do not borrow the bake or broil meaning.
FC E1 says the range could not connect to the router, and that there is no link between the Wi-Fi module and the router. The page adds a router reset: if another Wi-Fi device works at the range, disconnect router power for 2 minutes, reconnect it, then disconnect the range for 2 minutes and reconnect. If the signal there is weak, Whirlpool says you can move the router, use a compatible extender, or contact the internet provider. FC E7 says the missing link is between the Wi-Fi module and the internet, and it tells you to start a cycle after the breaker reset. FC E8 is a registration error: enter the SAID number again, and select the right appliance type and model. The other FC codes on Whirlpool's index were not opened on 21 Nov 2026 and are not in the table.
Every range page opened on 21 Nov 2026
Full pages exist only for F1 E1 and F2 E1. F1 E1 already had a URL here. F2 E1 is the code with a check the others do not share. The rest stay in this table. Publishing a separate page for each breaker reset would be the same article with the code swapped. Whirlpool's index also lists FBE1 and FBE2. Those two pages were not opened, so they are not given a meaning here.
| Code | What that Whirlpool page says | Anything besides the reset |
|---|---|---|
| F0 E0 | Whirlpool says there may be a problem with a component of the oven control system, the electronic control, or the associated wiring. | Breaker reset only. |
| F01 | Whirlpool says there may be a problem with the oven temperature sensor, the control, or the associated wiring. | Breaker reset only. |
| F02 | Whirlpool says there may be a problem with the oven temperature sensor, the control, or the associated wiring. | Breaker reset only. |
| F03 | Whirlpool says there may be a problem with the electronic oven control, or the associated wiring. | Breaker reset only. |
| F04 | Whirlpool says there may be a problem with the electronic oven control, or the associated wiring. | Breaker reset only. |
| F05 | Whirlpool says there may be a problem with the door latch assembly, the door switch, or the associated wiring. | Breaker reset only. |
| F06 | Whirlpool says there may be a problem with the electronic control, or the associated wiring. | Breaker reset only. |
| F1 | Whirlpool says there may be a problem with the oven temperature sensor, the control, or the associated wiring. | Breaker reset only. |
| F1-1 | Whirlpool says there may be a problem with the oven temperature sensor, the control, or the associated wiring. | Breaker reset only. |
| F1-2 | Whirlpool says there may be a problem with the oven temperature sensor, the control, or the associated wiring. | Breaker reset only. |
| F1-3 | Whirlpool says there may be a problem with the oven temperature sensor, the control, or the associated wiring. | Breaker reset only. |
| F1-5 | Whirlpool says there may be a problem with the oven control, the user interface or keypad, or the associated wiring. | Breaker reset only. |
| F1-7 | Whirlpool says there may be a problem with the oven control, or the associated wiring. | Breaker reset only. |
| F1-8 | Whirlpool says there may be a problem with the oven control, the user interface or keypad, or the associated wiring. | Breaker reset only. |
| F1-9 | Whirlpool says there may be a problem with the oven control, or the associated wiring. | Breaker reset only. |
| F1-A | Whirlpool says there may be a problem with the oven door latch, the door lock switch, or the associated wiring. | Breaker reset only. |
| F1-C | Whirlpool says there may be a problem with the oven door latch, the door lock switch, or the associated wiring. | Breaker reset only. |
| F1-E | Whirlpool says there may be a problem with the oven control, or the associated wiring. | Breaker reset only. |
| F1-H | Whirlpool says there may be a problem with the oven temperature sensor, the control, or the associated wiring. | Breaker reset only. |
| F1-L | Whirlpool says there may be a problem with the oven temperature sensor, the control, or the associated wiring. | Breaker reset only. |
| F1 E0 | Whirlpool says there may be a problem with the oven control, or the associated wiring. | Breaker reset only. |
| F1 E1 | Whirlpool says there may be a problem with the oven control, or the associated wiring. | Breaker reset only. |
| F1 E2 | Whirlpool says there may be a problem with the oven control, or the associated wiring. | Breaker reset only. |
| F1 E5 | Whirlpool says there may be a problem with the oven control, or the associated wiring. | Breaker reset only. |
| F1 E7 | Whirlpool says there may be a problem with the appliance control board, or the associated wiring. | Breaker reset only. |
| F1 E9 | Whirlpool says there may be a problem with the appliance control board, or the associated wiring. | Breaker reset only. |
| F2 | Whirlpool says there may be a problem with the oven temperature sensor, the control, or the associated wiring. | Breaker reset only. |
| F2 E0 | Whirlpool says there may be a problem with the user interface or keypad, the control, or the associated wiring. | Breaker reset only. |
| F2 E1 | Whirlpool first asks whether the cooktop grates are installed level. If that is not the cause, there may be a problem with the user interface or keypad, the control, or the associated wiring. | The grate check is the step the other F2 pages do not have. |
| F2 E2 | Whirlpool says there may be a problem with the user interface or keypad, the control, or the associated wiring. | Breaker reset only. |
| F2 E3 | Whirlpool says there may be a problem with the user interface or keypad, the control, or the associated wiring. | Breaker reset only. |
| F2 E4 | Whirlpool says there may be a problem with the user interface or keypad, the control, or the associated wiring. | Breaker reset only. |
| F2 E5 | Whirlpool says there may be a problem with the user interface or keypad, the control, or the associated wiring. | Breaker reset only. |
| F2 E6 | Whirlpool says there may be a problem with the user interface or keypad, the control, or the associated wiring. | Breaker reset only. |
| F3-1 | Whirlpool says there may be a problem with the oven temperature sensor, the control, or the associated wiring. | Breaker reset only. |
| F3 | Whirlpool says there may be a problem with the oven control, or the associated wiring. | Breaker reset only. |
| F3 E0 | Whirlpool says there may be a problem with the oven temperature sensor, the control, or the associated wiring. | Breaker reset only. |
| F3 E1 | Whirlpool says there may be a problem with the oven temperature sensor, the control, or the associated wiring. | Breaker reset only. |
| F3 E2 | Whirlpool says there may be a problem with the oven temperature sensor, the warming drawer sensor if the range has one, or the associated wiring. | Breaker reset only. |
| F3 E3 | Whirlpool says there may be a problem with the oven temperature sensor, or the associated wiring. | Breaker reset only. |
| F3 E4 | Whirlpool tells you to verify that the meat probe is securely inserted in the meat probe receptacle. It says the location may vary. | Seat the meat probe, then do the breaker reset. F8 uses the same probe sentence. |
| F5 | Whirlpool says there may be a problem with the oven door latch assembly, the door latch switches, or the associated wiring. | Breaker reset only. |
| F5 E0 | Whirlpool says there may be a problem with the oven door latch assembly, the door switch, or the associated wiring. | Breaker reset only. |
| F5 E1 | Whirlpool says there may be a problem with the main oven door latch assembly, the door switch, or the associated wiring. | Breaker reset only. |
| F5 E2 | Whirlpool says there may be a problem with the main oven door latch assembly, the door switch, or the associated wiring. | Breaker reset only. |
| F5 E3 | Whirlpool says there may be a problem with the main oven door latch assembly, the door switch, or the associated wiring. | Breaker reset only. |
| F5 E5 | The oven has not reached self-clean temperature after 30 minutes. Whirlpool says there may be a problem with the door hinges or the door gasket. | Whirlpool names the hinges or the gasket. The only owner step on the page is still the 1 minute breaker reset. |
| F5 E7 | Whirlpool says there may be a problem with the oven door latch assembly, the door switch, or the associated wiring. | Breaker reset only. |
| F6 | Whirlpool says there may be a problem with the oven control, or the associated wiring. | Breaker reset only. |
| F6 E0 | Whirlpool says there may be a problem with the oven control, the appliance manager, or the associated wiring. | Breaker reset only. |
| F6 E1 | Whirlpool says there may be a problem with the appliance manager, or the associated wiring. | Whirlpool adds that a variety of reasons can cause this. The page does not list them. |
| F6 E3 | Whirlpool says there may be a problem with the appliance manager, or the associated wiring. | Whirlpool adds that a variety of reasons can cause this. The page does not list them. |
| F6 E4 | Whirlpool says there may be a problem with the oven appliance manager or the oven control, or the associated wiring. | Breaker reset only. |
| F6 E5 | Whirlpool says there may be a problem with the user interface, or the associated wiring. | Breaker reset only. |
| F6 EA | Whirlpool says there may be a problem with the user interface, or the associated wiring. | Breaker reset only. |
| F7 E0 | Whirlpool says there may be a problem with the oven door latch assembly, or the associated wiring. | Breaker reset only. |
| F7 E1 | Whirlpool says there may be a problem with the door switch, or the associated wiring. | Breaker reset only. |
| F7 E5 | Whirlpool says there may be a problem with the cooling fan, or the associated wiring. | Breaker reset only. |
| F7 E6 | Whirlpool says there may be a problem with the cooling fan, or the associated wiring. | Breaker reset only. |
| F8 | Whirlpool tells you to verify that the meat probe is securely inserted in the meat probe receptacle. It says the location may vary. This is the same owner step as F3 E4, not a fan code. | Seat the meat probe, then do the breaker reset. Same sentence as F3 E4. |
| F8 E0 | Cooling fan speed is too low. Whirlpool says there may be a problem with an airflow restriction, the oven cooling fan, or the associated wiring. | Speed too low. The page does not tell you to open the fan. |
| F8 E2 | Cooling fan speed is too high. Whirlpool says there may be a problem with the oven cooling fan, or the associated wiring. | Speed too high. Unlike F8 E0, this page does not mention an airflow restriction. |
| F8 EA | Whirlpool says there may be a problem with the user interface, or the associated wiring. | Breaker reset only. |
| F9-1 | Whirlpool says there may be a problem with the oven door latch, the door lock switch, or the associated wiring. | Breaker reset only. |
| F9-2 | Whirlpool says there may be a problem with the oven door latch, the door lock switch, or the associated wiring. | Breaker reset only. |
| F9-3 | Whirlpool says there may be a problem with the oven door latch, the door lock switch, or the associated wiring. | Breaker reset only. |
| FEE6 | Whirlpool says there may be a problem with the main cavity bake element, or the associated wiring. | Breaker reset only. |
| FEE7 | Whirlpool says there may be a problem with the main cavity broil element, or the associated wiring. | Breaker reset only. |
| FEE8 | Whirlpool's FEE8 page publishes the 1 minute breaker reset and does not name a part. | No part is named. Do not borrow a meaning from FEE6 or FEE7. |
| FC E1 | The range could not connect to the router. Whirlpool names a connection timeout, poor signal, a failed router, the Wi-Fi module, or the associated wiring. | Router link, not the internet link that FC E7 names. |
| FC E7 | The range did not connect to the router. Whirlpool says there is no link between the Wi-Fi module and the internet. That is a different sentence from FC E1, which names the router. | Whirlpool's FC E7 page says the missing link is to the internet, and it tells you to start a cycle after the reset. |
| FC E8 | A registration error. Whirlpool asks whether the SAID number was entered correctly, and whether the right appliance type and model were selected. | We did not copy a phone number from the page. |
Frequently asked questions
What does a Whirlpool oven F code mean?
It depends on the rest of the code. On the range pages opened 21 Nov 2026, Whirlpool gives almost every code the same owner step, a 1 minute breaker reset, and then names a different part. F1 E1 names the oven control. F2 E1 starts by asking whether the grates sit level. F3 E1 names the oven temperature sensor.
Should I replace the part Whirlpool names?
No. Those pages tell you to reset power and to schedule service if the code comes back. They do not publish a procedure for replacing a control, a sensor, a latch, a fan, or an element. Unplug the appliance or switch off the breaker before you move the range. Shut the gas off before any inspection past the published reset.
Does this table cover a Whirlpool wall oven?
No. This is the freestanding and slide-in range list. Whirlpool publishes wall oven codes separately, and that list was not opened on 21 Nov 2026. Use the manual for a wall oven.
Sources
- Whirlpool Product Help: range codes that start with F
- Whirlpool Product Help: range F0 E0
- Whirlpool Product Help: range F01
- Whirlpool Product Help: range F02
- Whirlpool Product Help: range F03
- Whirlpool Product Help: range F04
- Whirlpool Product Help: range F05
- Whirlpool Product Help: range F06
- Whirlpool Product Help: range F1
- Whirlpool Product Help: range F1-1
- Whirlpool Product Help: range F1-2
- Whirlpool Product Help: range F1-3
- Whirlpool Product Help: range F1-5
- Whirlpool Product Help: range F1-7
- Whirlpool Product Help: range F1-8
- Whirlpool Product Help: range F1-9
- Whirlpool Product Help: range F1-A
- Whirlpool Product Help: range F1-C
- Whirlpool Product Help: range F1-E
- Whirlpool Product Help: range F1-H
- Whirlpool Product Help: range F1-L
- Whirlpool Product Help: range F1 E0
- Whirlpool Product Help: range F1 E1
- Whirlpool Product Help: range F1 E2
- Whirlpool Product Help: range F1 E5
- Whirlpool Product Help: range F1 E7
- Whirlpool Product Help: range F1 E9
- Whirlpool Product Help: range F2
- Whirlpool Product Help: range F2 E0
- Whirlpool Product Help: range F2 E1
- Whirlpool Product Help: range F2 E2
- Whirlpool Product Help: range F2 E3
- Whirlpool Product Help: range F2 E4
- Whirlpool Product Help: range F2 E5
- Whirlpool Product Help: range F2 E6
- Whirlpool Product Help: range F3-1
- Whirlpool Product Help: range F3
- Whirlpool Product Help: range F3 E0
- Whirlpool Product Help: range F3 E1
- Whirlpool Product Help: range F3 E2
- Whirlpool Product Help: range F3 E3
- Whirlpool Product Help: range F3 E4
- Whirlpool Product Help: range F5
- Whirlpool Product Help: range F5 E0
- Whirlpool Product Help: range F5 E1
- Whirlpool Product Help: range F5 E2
- Whirlpool Product Help: range F5 E3
- Whirlpool Product Help: range F5 E5
- Whirlpool Product Help: range F5 E7
- Whirlpool Product Help: range F6
- Whirlpool Product Help: range F6 E0
- Whirlpool Product Help: range F6 E1
- Whirlpool Product Help: range F6 E3
- Whirlpool Product Help: range F6 E4
- Whirlpool Product Help: range F6 E5
- Whirlpool Product Help: range F6 EA
- Whirlpool Product Help: range F7 E0
- Whirlpool Product Help: range F7 E1
- Whirlpool Product Help: range F7 E5
- Whirlpool Product Help: range F7 E6
- Whirlpool Product Help: range F8
- Whirlpool Product Help: range F8 E0
- Whirlpool Product Help: range F8 E2
- Whirlpool Product Help: range F8 EA
- Whirlpool Product Help: range F9-1
- Whirlpool Product Help: range F9-2
- Whirlpool Product Help: range F9-3
- Whirlpool Product Help: range FEE6
- Whirlpool Product Help: range FEE7
- Whirlpool Product Help: range FEE8
- Whirlpool Product Help: range FC E1
- Whirlpool Product Help: range FC E7
- Whirlpool Product Help: range FC E8
Each linked page was opened 21 Nov 2026. Wall oven codes, FBE1, FBE2, and the FC codes missing from the table were not opened. Which Error Code is not affiliated with Whirlpool.
All Whirlpool pages · All oven brands · GE oven codes · Samsung oven codes · Safety notes